PRODUCT SELECTOR



CAL 9500 SERIES RAMP SOAK PANEL MOUNT TEMPERATURE CONTROLLER

CAL 9500 SERIES RAMP SOAK PANEL MOUNT TEMPERATURE CONTROLLER

9500 Dual-Display Process Controller

  • 1/16th DIN 48 x 48mm
  • Set-point and process value shown
Options:
  • Inputs:  sensor, thermocouple, 0-5, 0-10, 4-20mA
  • Outputs:  (third is always relay)
    Outputs 1 & 2 a combination from: SSR driver, relay, 4-20mA, 0-5V, 0-10V
  • Communications:  RS232, RS485 with MODBUS RTU protocol
The 9500 is sleeve mounted allowing the
fitting of comms boards for networking.
Specifications for 9500 Controller
  • Thermocouple types
    9 types:  B,E,J,K,L,N,R,S,T
    Standards: IPTS/68/ DIN 43710
    CJC rejection: 20:1 (0.05º/ºC) typical
    External resistance: 100 ohms maximum
  • Resistance Thermometers
    RTD/PT100 2 & 3 wire
    Standards:  DIN43760 (-200/400ºC)
  • Linear process inputs
    Options:  0 to 50mV +/-0.1%
    4-20mA +/-0.1%
    0-5V +/-0.1%
    0-10V +/-0.1%
  • General
    Displays: 
    Upper, 4 digits, high brightness green LED 10.4mm (0.4") high
    Lower, 4 digits, high brightness orange LED 9mm (0.35") high
    Digital range –199 to 9999
    Hi-res mode –199 to 999.9
    LED output indicators:  flashing SP1 square, green; SP2/SP3 round, red
    Keypad:  3 elastomeric buttons
    Power Supply:  100-240V AC, 50-60 Hz , (typ' 5.0 VA)
  •  Output devices (check configuration)
    SSd1 and SSd2:  solid state relay driver: to switch a remote SSR 6VDC (nominal) 20mA non-isolated
    Miniature power relay:  orm A/SPST contacts (AgCdO)
    rLY1, rLY2, rLT3:  2A/250VAC resistive load
    Analogue output:  4-20mA 500 ohms max’ +/- 0.1% fs
    typical:  0-5Vdc 10mA (500 ohms min’) +/- 0.1% fs
    typical:  0-10Vdc 10mA (1K ohms min’) +/- 0.1% fs
  • Environmental
    Humidity:  Max 80%
    Altitude:  up to 2000M
    Installation:  categories II and III
    Pollution:  Degree II
    Protection:  NEMA 4X, IP66
    EMC emission:  EN50081-1 FCC rules 15 sub-part J class A
    EMC immunity:  EN50082-2
    Ambient temperature:  0-50ºC (32-130ºF)
    Mouldings:  flame retardent polycarbonate
    Weight:  180g (6.4 oz)
  • Applicable to all inputs (SM = sensor maximum)
    Calibration accuracy:  +/- 0.25% SM +/-1ºC
    Sampling frequency:  input 10Hz, CJC 2 sec.
    Common mode rejection:  Negligible effect up to 140db, 240V, 50-60Hz
    Series mode rejection:  60db, 50-60Hz
    Temperature coefficient:  50ppm/ºC SM typical
    Reference Conditions: 22ºC +/- 2ºC, rated voltage after 15 minutes settling time
  • Dimensions
    Front fascia:  51.0 x 51.0mm (2.0" x 2.0") (includes gasket)
    Sleeve length:  106.7mm (4.2") (with gasket fitted)
    Instrument body:  44.8 x 44.8mm (1.76" x 1.76")
    Overall length:  116.2mm (4.57")
Features of 9500 controller
  • Full PID autotuning process controller
  • 4-20mA input and output
  • Total of 3 outputs, from 4-20mA, SSR drive, relay
  • Input options:
    4-20mA
    Thermocouple
    2 or 3 wire PT100
    0-50mV, 0-5, 0-10V
  • Alarms with 5 options
  • PID heat-cool operation
  • Ramp & soak operation
  • Sleeve mounting for easy maintenance
  • IP66 protection from front panel
  • CE, UL & CSA approvals
  • 3-year warranty
  • Charting and logging software option
  • RS232/485 Modbus option

For sales please call 866-379-3597


CAL 9500 > DOCUMENTATION

CAL 9500 User's Manual